Oce Colorado 1640 Operation Manual page 58

Load a media roll (position 2)
11. Use both hands to move the media forward and slide the media under the metal paper guide (2).
Make sure the printer takes the media and transports it automatically. It has worked when you
hear a beeping sound.
12. Close the media drawer carefully. The operator panel displays the message that new media is
detected.
IMPORTANT
Do not open the media drawer when the indicator light is off, you can damage the
machine.
13. On the operator panel, select the correct media type and fill in the media width.
14. Select if and what type of clean cut you want the printer to make, when you use the media for the
first time.
For winding with a tension bar or with a locked tension bar the clean cut is neglected.
58 Chapter 3 - Handle the media
2