Oce Colorado 1640 Operation Manual page 122

Replace the knife
8. Take the knife out.
Make sure you position the knife in such a way it does not hit the sensor.
9. Place a new knife with the wheel top-first in the rails and let it fall into position. Test to make sure
the knife slides well on the rails.
10. Fasten the two screws, hand tight.
11. Place the knife compartment cover back into position.
12. Fasten the screw on top of the cover.
13. Close the top cover from the media input side.
122 Chapter 5 - Maintain the system
1
2