How To Implement The Auxiliary System Function Setting - Owon SDS6062 User Manual

To use wave record function, do as follows:
(1) Press Save button.
(2) Press H1 button, turn the M knob to choose Record.
(3) Press H2 button. In the Mode menu, press F2 button to choose Record.
(4) Press H3 button. In the Frame Set menu ,press F1 button and turn the M knob to
set End frame ; press F2 button and turn the M knob to select the interval
between recorded frames.
(5) Press H4 button, choose whether to refresh the wave when recording.
(6) Press H5 button to start recording.
(7) Press H2 button. In the Mode menu, press F3 button to enter the Playback mode.
Set the frame range and Playmode .Then ,press H5 button to play.
(8) To save the wave recorded, press H2 button. In the Mode menu, press F4 button
to choose Storage ,then set the range of frames to store, press H4 button to save.
(9) To load the waveform from the internal memory, press Load, and then enter
playback mode to analyze the wave.

How to Implement the Auxiliary System Function Setting

●Config
Press the Utility button and turn the M knob to select Config to go to the following
menu.
The description of Configuration Menu is shown as the follows:
Function Menu
language
Set Time
KeyLock
About
User Manual of Smart Digital Storage Oscilloscope
Fig.5-39 Configuration Menu
Setting Description
Chinese
Choose the display language of the operating
English
system.
Others
On
Display On/Off the date display
Off
Hour Min Setting Hour/Minute
Day Month Setting Date/Month
Year Setting Year
Lock all keys. Unlock method: press 50%
button in trigger control area, then press
Force button, repeat 3 times.
Version number and serial number showing
5. Advanced User Guidebook
54