Precor GEN06 Series C952 Service Manual page 73

7. Tension the running belt to specification and verify tracking, see
and Tracking Adjustment" on
8. Replace the belt guard cover ensuring the tabs are firmly locked into position on the
Take Up Roller shaft, see
9. Replace the end cap (see
10. Replace the hood cover.
11. Verify treadmill operation (see
.See Also
"Replacement Procedures" on page 29
"Running Belt Tension and Tracking Adjustment" on page 26
"Running Belt and Deck Replacement" on page 61
(Undefined variable: TRM700-16Base.ServiceManualTitle)
page 26.
"End Cap & Belt Guard Cover Replacement" on
"End Cap & Belt Guard Cover Replacement" on
Operation Verification) and return to service.
5 Replacement Procedures
Take Up Roller Replacement
"Running Belt Tension
page 46.
page 46).
67