I/O Address Map; A.4 I/O Address Map - Kontron MOPSlcdLX User Manual

KTD-S0005-0
A.4

I/O Address Map

The I/O-port addresses of the MOPSlcdLX are functionally identical to a standard PC/AT. All addresses not
mentioned in this table should be available. We recommend that you do not use I/O addresses below 0100h
with additional hardware for compatibility reasons even though they are available.
I/O Address
01F0h - 01F7h
0278h - 027Fh
0290h - 0297h
02E8h - 02EFh
02F8h - 02FFh
0378h - 037Fh
03BCh - 03C4h
03B0h - 03DFh
03E8h - 03EFh
03F0h - 03F7h
03F8h - 03FFh
0480h - 048Fh
04D0h - 04D8h
0A78h - 0A7Fh
0CF8h - 0CFFh
6000h - 63FFh
9C00h - 9FFFh
AC1Ch - AC1Fh
FE00h - FE0Fh
FF00h - FF3Fh
Note: If the Used for device is disabled in the BIOS Setup the corresponding address is free.
1)
Page 40
Used for Available
IDE Controller (P-ATA)
Hardware Monitor
Serial Port 2
Parallel Port 1
Graphic Controller
Floppy Controller
Serial Port 1
DMA Extension
PIC Extension
PnP Configuration
PCI Configuration
AMD PCI ISA-Bridge
AMD PCI ISA-Bridge
AMD PCI Host Bridge
AMD PCI IDE Controller
®
Intel LAN Controller
MOPSlcdLX User's Guide
Appendix A: System Resources
Comment
No Note (1)
Yes Possible address of LPT2
No
Yes Possible address of COM4
No Note (1)
No Note (1)
Yes Possible address of LPT3
No
Yes Possible address of COM3
No Note (1)
No Note (1)
No Chipset
No Chipset
No
No Chipset
No Chipset
No Chipset
No Chipset
No Chipset
No External PCI device