Table of Contents
Advertisement
KTD-S0005-0
16
LAN Controller
The MOPSlcdLX uses an Intel
interfaces. The devices auto-negotiates the use of a 10 or 100 Mbps connection.
Additionally it is possible to enable the LAN PXE Boot in the BIOS Setup to allow the system to boot up via a
network connection from a PXE server.
16.1
Connector
The LAN interface is available through the connector X16000 (8 pins). To have the signals available on a
standard RJ45 connector you need an adapter cable which is offered by KONTRON (KAB-MOPS-ETN1, part
number 96048-0000-00-0).
Header
Page 25
®
82551ER PCI Fast Ethernet controller. The controller support 10/100 Base-T
Pin
Signal Name
1
TXD+
2
TXD-
RXD+
3
GND
4
GND
5
RXD-
6
GND
7
GND
8
MOPSlcdLX User's Guide
Function
10/100 transmit (positive)
10/100 transmit (negative)
10/100 receive (positive)
Ground (shield)
Ground (shield)
10/100 receive (negative)
Ground (shield)
Ground (shield)
LAN Controller
Advertisement
Table of Contents
