Crisis Management - Kontron MOPSlcdLX User Manual

KTD-S0005-0
18

Crisis Management

Modifying parameters in the BIOS Setup implies the risk of leaving your system in a unbootable state. In
case this happens two jumper exists to reset the settings to 'Fail-Safe values'.
In case no battery is connected then follow these five steps:
‚
Power down the system
ƒ
Remove the tagged jumper JP14002 (see the picture)
„
Power up the system and enter the BIOS Setup
…
Before saving your new settings with 'Save & Exit' put the jumper back
†
The board should be functional now
In case there is a backup battery for the real time clock:
‚
Power down the system
ƒ
Switch the second jumper JP7000 as depicted and wait for 3 seconds
„
Put the jumper back as it was before
Then continue with the steps from the no battery case.
Page 28
MOPSlcdLX User's Guide
Crisis Management