Operation Security Settings In The Nv Configuration - Omron NV Series Programming Manual

Security Functions
8-6-5

Operation Security Settings in the NV Configuration

The following tab page will be displayed when the Password Tab is clicked in
the NV Configuration Dialog Box.
Password Tab Page
Item
Operation Security Function
Available
Level Output
Function when Operation
Restricted
Change Screen upon Logout
Time-Out Automatic
Logout
Login Screen
Time-Out
Password
Change
Screen Time-
Out
Description
Enables or disables operation security.
Sets whether to output the security level to an
address. Specifies the output address if the security
level is to be output.
Specifies what happens when a part with a higher
security level than the current one is touched.
• Off: No operation.
• Output Warning Beep: The buzzer beeps to warn
you.
• Display Login Screen: A login screen is displayed.
Set the login screen number (0 to 15) to display.
Note A login screen will need to be created.
Sets whether to change the screen when logging
out of a security level. To change to the specified
screen, set the screen number (0 to 1,023) to dis-
play when logging out.
Sets whether to automatically log out (level 0) after
a period of inactivity. Sets the time of inactivity until
the automatic logout (1 to 42 minutes).
Enables or disables automatically returning to the
original screen from the Login Screen where the
password is entered. If the timeout function is used
for the Login Screen, set the time before returning
to the original screen to between 1 and 42 minutes.
Enables or disables automatically returning to the
original screen from the Password Change or Man-
agement Screen. If the timeout function is used for
the Password Change Screen, set the time before
returning to the original screen to between 1 and 42
minutes.
Section 8-6
185