Omron NV Series Programming Manual page 40

NV-Designer Window Names and Menus
Menu Submenu/Command
Edit Undo
Redo
Cut
Copy
Repeat
Paste
Copy Bitmap of Base
Screen
Align
Centering
Rotate
Flip
Delete
Erase Screen
Bring Previous
Bring Next
Bring Forefront
Bring Behind All
Group
Ungroup
Select
Select All
Undoes the previous operation.
Redoes the previous operation.
Cuts the selected parts.
Copies the selected parts.
Creates a base part which is copied to enable the creation of
multiple parts with different functions.
Pastes the parts that were last cut or copied.
Copies the base screen contents as bitmap data.
Left Aligns the left sides of the selected graphics.
Right Aligns the right sides of the selected graphics.
Top Aligns the top edges of the selected graphics.
Bottom Aligns the bottom edges of the selected graphics.
Horizontal Center Aligns the horizontal centers of the selected graphics.
Vertical Center Aligns the vertical centers of the selected graphics.
Centers multiple graphics figures.
Rotates the selected graphics.
Right/Left Flips the selected graphics left to right.
Top/Bottom Flips the selected graphics top to bottom.
Deletes the selected items.
Deletes the base screen
Moves the selected graphic up one layer.
Moves the selected graphic back one layer.
Places the selected graphics on the top.
Places the selected graphics on the back.
Creates a group of character strings, graphics, or parts.
Ungroups a group of parts.
Selects character strings, graphics, and parts.
Selects all character strings, graphics, and parts on the base
screen.
Section 3-2
Description
19