Omron NV Series Programming Manual page 118

Character Strings and Graphics (Fixed Parts)
Drawing Graphics
Pasting Bitmap Data
1,2,3...
Note
8. Set the font, character size, and other attributes, and then click the OK But-
ton.
Draw the required graphics.
For example, draw a rectangle with rounded corners.
Click the Rectangle Button (
angle.
Click the Color Button (
For a rectangle with rounded corners, change the line color and pattern of the
corners.
1. Copy bitmap data to the clipboard in advance.
2. Right-click at the position where you want to insert the base screen.
3. Select Paste (Ctrl+V).
(1) It is not possible to paste data that is larger than the screen.
(2) For color data and grayscale data, the number of colors or the number of
shades of gray will be automatically reduced according to the capabilities
of the PT model.
) on the graphic bar, and then draw the rect-
) on the graphic bar.
Section 7-1
97