Omron NV Series Programming Manual page 104

Setting the NV Configuration from the NV-Designer
Setting Up Auto-Paging Select the On Option for Auto-Paging and click the Setup Button. The Auto-
Paging Dialog Box will be displayed. Set the screen number, time, and jump
destination, then click the Save Button.
1
2
3
Item
1 Screen No.
2 Time
3 Jump to
4 Settings Display
Area
5 OK Button
6 Delete Button
7 Save Button
Description
Enter the number of the screen to switch to automatically
within the range given in parentheses.
Sets the time the switched screen is displayed. It can be
set to between 1 and 255 seconds.
Sets the screen number to switch to.
Sets up auto-paging.
Closes the Auto-Paging Dialog Box and returns to the
Auto-Paging Tab Page.
Deletes the screens saved in auto-paging.
Saves the settings.
Section 6-2
4
5
6
7
83