Omron NV Series Programming Manual page 67

Creating a Simple Screen
1,2,3...
1,2,3...
1,2,3...
46
6. Change the status between OFF and ON at the top right of the tool bar and
check the displays.
Opening Screen 1
1. Double-click "1" in the Screen Manager at the upper right of the window.
The base screen with screen number 1 will open.
Setting Character Strings
1. Click the Button on the graphic bar and enter the following character
string on screen 1.
Speed, Alarm
Setting Data
Use the following procedure to create a data part that will display the contents
of a word address in the PLC on screen 1.
1. Select Data from the Standard Parts Library.
2. Drag the part called Data and drop it on the base screen.
Section 4-2