Using Recipes - Omron NV Series Programming Manual

Recipes
8-5-3

Using Recipes

1,2,3...
Additional Information
• Write, read, and deletion cannot be performed simultaneously. If all bits are
ON, write, read, or deletion will be performed in that order.
• If all flags are OFF, either write, read, or deletion can be performed.
1. Start the Recipe Menu.
2. Click the NV Config Button to setup the PT Configuration.
3. Change the Data/Recipe Setting.
Section 8-5
Select Recipe from the PT
Menu.
Make the following settings,
and then click the OK Button.
Recipe: On
Control Address: W20
Up to 100 (No. 0 to 63) recipe
files can be created.
Select file 0 from the recipe
list and click the Open Button.
Change the Data/Recipe Set-
ting as follows:
Data Sets (Rows) Entry
Address Number:
10
Recipes (Columns): 3
175