Omron NV Series Programming Manual page 150

Level Meters
2. Double-click the level meters. Set the basic setup.
3. Change the set values.
4. Make the settings on the Display Numeric Tab Page.
5. After the settings have been made, transfer the screen data to the PT.
6. Check the display on the PT.
Section 7-8
Set the maximum and mini-
mum values.
Leave the default settings
(Max.: 100; Min.: 0) as is.
Click the Display Numeric
Tab.
Select the On Option.
Display %: On
Font: Vertical: 1,
Horizontal: 1
Note The displayed value is
the percentage of the
difference between the
maximum value and
minimum value.
Select the On Option for the
Display % attribute to display
the percentage followed by
the percentage sign.
Click the OK Button to display
the value as a percentage
enclosed in a frame, and then
click a point under the graph
as shown on the left.
When the transfer has been
completed, the level meters
created on the NV-Designer
will be displayed on the PT.
129