Starting The Nv-Designer And Creating New Projects; Starting The Nv-Designer And Using The New Project Wizard - Omron NV Series Programming Manual

Starting the NV-Designer and Creating New Projects

5-1

Starting the NV-Designer and Creating New Projects

5-1-1

Starting the NV-Designer and Using the New Project Wizard

1,2,3...
54
This section describes how to start the NV-Designer and create projects.
1. Select Program – OMRON – NV-Designer – NV-Designer Ver.@ from the
Windows Start Menu to start the NV-Designer. (The menu commands may
be different if a different Program Folder was specified during installation.)
2. When the NV-Designer is started, the NV-Designer Dialog Box will be dis-
played.
3. Select an option in the NV-Designer Dialog Box and click the OK Button.
1
2
3
Item
1 Create New Project
2 Open Existing Project
3 Recent Projects
Description
Select this option to create a new project.
Select this option to read and edit a project that
is saved to the disk. A dialog box for opening
the project will be displayed for you to select
the project that you want to edit.
Select this option to open a project that has
been used recently.
Section 5-1