Setting the NV Configuration from the NV-Designer
6-2-5
PLC Multiple Connection Tab
PLC Unit Number and
Comment
This tab page is used to set parameters when connecting multiple PLCs or
OMRON EJ1 Temperature Controllers using Modbus. The following dialog
box will be displayed when the PLC Multiple Connection Tab is clicked in the
NV Configuration Dialog Box.
Item
PLC Multiple Con-
• No
nection
PLC multiple connection is not used.
• Yes
PLC multiple connection is used.
If the Yes Option is selected, the PT will recognize the unit
number set in the PLC.
The following dialog box is displayed if the Yes Option is selected for PLC mul-
tiple connection.
Section 6-2
Description
81