Omron NV Series Programming Manual page 147

Data Parts and Keyboard Parts
126
5. Arrange keyboards and data parts on the keyboard screen.
6. Double-click the data part and change the input attributes.
Section 7-7
Drag the DEC Sign 1 Key-
board Part and the data part
from the standard parts library
and drop them on the key-
board screen.
(Do not change the settings of
KY0 and DA0 on keyboard
screen 0.)
You do not need to set the
data format for the data part
on the keyboard screen.
The data format of the data
that is automatically loaded
will be set automatically.
Set the number of data digits
to the same or higher than the
number of data digits in the
data being loaded.
Double-click DA0 on the base
screen, then click the Input
Tab.
Make the following settings,
and then click the OK Button.
Select the On Option.