Omron NV Series Programming Manual page 175

Alarm Lists (NV4W/NV3Q)
154
8. Double-click the FS0 function switch and set the attributes.
9. Double-click the FS1 function switch and set the operation mode.
10. Double-click the FS2 function switch and set the operation mode.
Section 7-11
Make the following settings,
and then click the OK Button.
Setting to Scroll Up the Alarm
Display
Basic Setup
Operation Mode: Others, To
Operate Alarm List (Cursor up
per line) set as required.
Label
ON String: UP
OFF String: UP
Make the following settings,
and then click the OK Button.
Setting to Scroll Down the
Alarm Display
Basic Settings
Operation Mode: Others, To
Operate Alarm Parts (Cursor
down per Line)
Label
ON String: DOWN
OFF String: DOWN
Make the following settings,
and then click the OK Button.
When a triggered alarm is
selected and this switch is
pressed, the guidance for the
alarm will be displayed.
Basic Settings
Operation Mode: Others, To
Operate Alarm List (Display
Guidance)
Label
ON String: GUIDE
OFF String: GUIDE