Manual Mode - ACME MP-400Z IP User Manual

Auto Test
Select Auto Test, press the ENTER button to confirm, the unit will run built-in programs to
automatically test. Press the MENU button back to the last menu or exit menu mode after
auto test.

Manual Mode

Enter menu mode, select Manual Mode press the ENTER button to confirm, use the
UP/DOWN button to select Dimmer, Strobe, Red, Green, Blue, White or Zoom. Use the UP/
DOWN button to adjust the value, press the ENTER button to store. Press the MENU
button back to the last menu or let the unit idle one minute to exit menu mode.
Display Settings
Enter menu mode, select Display Setting, press the ENTER button to confirm, use the
UP/DOWN button to select Inverse, Temperature Unit, Display Warming or Language.
Inverse
Select Inverse, press the ENTER button to confirm, present mode will blink on the display, use
the UP/DOWN button to select No (normal display) or Yes (inverse display), press the ENTER
button to store. Press the MENU button back to the last menu or let the unit idle one minute
to exit menu mode.
Temperature Unit
Select Temperature Unit, press the ENTER button to confirm, present mode will blink on the
display, use the UP/DOWN button to select ℃ or ℉, press the ENTER button to store. Press
the MENU button back to the last menu or let the unit idle one minute to exit menu mode.
Display Warning
Select Display Warning, press the ENTER button to confirm, present mode will blink on the
display, use the UP/DOWN button to select Yes or No, press the ENTER button to store. Press
the MENU button back to the last menu or let the unit idle one minute to exit menu mode.
Language
Select Language, press the ENTER button to confirm, present mode will blink on the display,
use the UP/DOWN button to select English or Chinese, press the ENTER button to store. Press
the MENU button back to the last menu or let the unit idle one minute to exit menu mode.
10B