How To Control The Unit - ACME MP-400Z IP User Manual

Fixture Information
Enter menu mode, select Fixture Information, press the ENTER button to confirm, use the
UP/DOWN button to select LED Temperature, Fixture use time, Light On time or Firmware
Version.
LED Temperature
Select LED Temperature, press the ENTER button to confirm, LED temperature will show on
the display, press the MENU button to exit.
Fixture use hour
Select Fixture use hour, press the ENTER button to confirm, fixture use time will show on the
display, press the MENU button to exit.
Light On Time
Select Light On time, press the ENTER button to confirm, light on time will show on the display,
press the MENU button to exit.
Firmware Version
Select Firmware Version, press the ENTER button to confirm, firmware version will show on
the display, press the MENU button back to exit.
Reset
Enter menu mode, select Reset, press the ENTER button to confirm, the fixture will reset.
Factory Setting
Select Factory Setting, press the ENTER button to confirm, the fixture will back to factory
setting. Press the MENU button to exit.

4.How To Control The Unit

You can operate the unit in two ways：
1. By master/slave built-in preprogram function
2. By DMX controller
11B