ACME MP-400Z IP User Manual page 4

 Do not touch any wire during operation as there might be a hazard of electric shock.
 Avoid power wires together arounding other cables.
 In the event of serious operating problem, stop using the unit immediately.
 Never turn on and off the unit time after time.
 The housing, the lenses, or the ultraviolet filter must be replaced if they are visibly damaged.
 Do not open the unit as there are no user serviceable parts inside. Never try to repair the unit
by yourself. Repairs carried out by unskilled people can lead to damage or malfunction. Please
contact the nearest authorized technical assistance center.
 Disconnect the mains power if the fixture is not used for a long time.
 Do use original packing materials once transport it again.
 To prevent or reduce the risk of electrical shock or fire, do not expose the unit to rain or
moisture.
 Do not look directly at the LED light beam while the fixture is on.
 To protect the machine, power off 10s rear can electrify.
Installation
The unit should be mounted via its screw holes on the bracket. Always ensure that the unit is
firmly fixed to avoid vibration and slipping while operating. Always ensure that the structure to
which you are attaching the unit is secure and is able to support a weight of 10 times of the
unit's weight. Also always use a safety cable that can hold 12 times of the weight of the unit
when installing the fixture.
The equipment must be fixed by professionals. And it must be fixed at a place where is out of the
touch of people and has no one pass by or under it.
3B