Bosch Plena Installation And User Instructions Manual page 69

Plena Voice Alarm System | Installation and User Instructions | Equipment
JP1
First EOL board
figure 14.3: Trigger input indication
5 In the configuration program, set the Action
Programming for the relevant input to Fault and
EOL.
6 Enter the Zone or Zone group that is monitored by
the EOL board. The Zone group can be All Zones
(of the Controller/Router), Zone 1-3 or Zone 4-6.
Fault Type and Zone will define the visual indication
on the unit in case of a fault.
7 Set the Action to Open and Type to Momentary. See
figure 14.4 for an example.
Bosch Security Systems | 2006-06 | 9922 141 10377 en
JP1
20k
JP1
Last EOL board
figure 14.4 Action programming window in
configuration program.
en | 69