JLG 800A Operation And Safety Manual page 56

SECTION 3 - MACHINE CONTROLS AND INDICATORS
3. Soft Touch Indicator (If Equipped)
When illuminated (Yellow) the Soft Touch bumper is
against an object. All controls are disabled until the
override button is pushed, at which time controls are
active in the Creep mode.
4. AC Generator (Green)
When illuminated (Green), the light indicates the genera-
tor is in operation.
5. Low Fuel Indicator (Yellow) N/A for liquid propane
When illuminated (Yellow), the fuel tank is 1/8 full or less.
When the light first turns on, there are approximately
four usable gallons of fuel remaining.
3-16
6. Capacity Indicator.
Indicates the maximum platform capacity for the current
position of the platform. Restricted capacities are permit-
ted at restricted platform positions (shorter boom
lengths and higher boom angles).
NOTE: Refer to the capacity decals on the machine for restricted
and unrestricted platform capacities.
7. Creep Speed Indicator
Illuminated (Green) when the Function Speed Control is
turned to the creep position, the indicator acts as a
reminder that all functions are set to the slowest speed.
8. Glow Plug Indicator (If Equipped)
When illuminated the glow plugs are operating. After
turning on ignition, wait until light goes out before crank-
ing engine.
– JLG Lift – 3121209