Oscillating Axle Lockout Test (If Equipped); 4.12 Towing - JLG 800A Operation And Safety Manual

NOTE: Crane and lifting devices, chains, slings, etc., must be
capable of handling the gross machine weight.
IMPORTANT
ABOVE IS MINIMUM WEIGHT. CHECK WEIGHT OF UNIT PRIOR TO LIFT-
ING.
NOTE: Lifting eyes are provided at the front and rear in the frame
slab. Each of the four chains or slings used for lifting
machine must be adjusted individually so machine
remains level when elevated.
IMPORTANT
SECURE TURNTABLE WITH TURNTABLE LOCK BEFORE TRAVELING
LONG DISTANCES OR HAULING MACHINE ON TRUCK/TRAILER.
3121209
4.11 OSCILLATING AXLE LOCKOUT TEST (IF
EQUIPPED)
LOCKOUT SYSTEM TEST MUST BE PERFORMED QUARTERLY, ANY
TIME A SYSTEM COMPONENT IS REPLACED, OR WHEN IMPROPER
SYSTEM OPERATION IS SUSPECTED.
Refer to Section 2.4, Oscillating Axle Lockout Test (If
Equipped) for procedure.

4.12 TOWING

The machine is not equipped with a tow package. Refer to
Section 5 for emergency towing procedures.
– JLG Lift –
SECTION 4 - MACHINE OPERATION
IMPORTANT
4-17