CARDIOSTRONG CST-TX40E Assembly And Operating Instructions Manual page 30

- Press the START button to start manual training without having to enter
any individual data. When the program starts, your training time will
count up from 00:00 and you can manually set the incline or the speed
during your training.
- If you would like to stop your training, press the START/STOP button to
Start/Stop
PAUSE. In order to restart training, press the START/STOP button again.
button
The console resets if there is no activity within 90 seconds. The auto-reset
can be raised to 300 seconds by going into the technical mode (P. 34 in
these instructions).
- If there is no lighting in the display and the scan light is only weakly
illuminated, press the START/STOP button for two seconds to turn on the
display.
In order to reset the console, press the RESET button. All training data
RESET
will be deleted.
The ENTER button serves for the selection of all information that is used
during the program setting (program, training level, training time, user
ENTER/MODE
weight). The specification of the user weight serves for a more precise
buttons
calculation of how many calories were burnt. The MODE button serves
to change between the displays for training feedback.
The UP and DOWN buttons for speed and incline serve to change the
value of any selection during the program setting and the setting of the
INCLINE/
speed and incline during training. If you use a preset program, you can
SPEED UP/
set the profile from the program with the help of these buttons in order
DOWN
to make the program easier or harder. For example, you can increase the
buttons
incline level for the entire program in the incline program by pressing
the INCLINE UP button.
BLUETOOTH
You can turn Bluetooth on or off with the Bluetooth button (optional).
button
-- eFOLD UP - You will hear a beeping sound every two to three seconds
meanwhile and it will first stop when the treadmill is in the corresponding
eFOLD
position.
button
- eFOLD DOWN - You will hear a beeping sound every two to three
seconds meanwhile and it will first stop when the treadmill is in the
corresponding position.
NOTE:
The sensor only works once eFOLD DOWN is complete. eFOLD DOWN will stop
immediately as soon as the sensor detects any objects below the deck. If the objects
cannot be removed, you will hear a beeping sound every second and the treadmill
will not work. If you would like to continue eFOLD DOWN, remove the disrupting
objects and press the eFOLD DOWN button again.
30
TX40e