Mounting The Sensor Head Of Laser Sighting Devices; Figure 10: Mounting The Fiber Optic Cable For Laser Sighting Devices - Fluke Endurance Series User Manual

Innovative high temperature fiber optic infrared pyrometers

Hide thumbs Also See for Endurance Series:

Table of Contents

Endurance® Series

Users Manual

5.2. Mounting the Sensor Head of Laser sighting devices

Sensors equipped with a sighting laser use a branched fiber optic cable. Insert the cable

through the bushing and behind the laser module. Note: one branch is large (sensor) and one

branch is small (sighting laser).

Laser Module

Note keyed connecting sleeve (can be inserted only one way

- slot must face mode switches)

Push large connecting sleeve in until it stops

(approx. 15 mm / 0.6 in)

Tighten screw (finger tighten only)

Tighten only after securing both connecting sleeves

Tighten set screw with 1.3 mm (0.05 in.) hex wrench

Laser aperture: push small connecting sleeve in until it stops

Table of Contents