External Sensor - Fluke 805 FC User Manual

805/805 FC
Users Manual

External Sensor

In addition to the integrated vibration sensor, an optional
external sensor connects to the Meter. The connector type
for the external sensor is a Subminiature version B (SMB).
Figure 3 shows how to connect an external sensor to the
Meter.
Fluke supports, but does not provide, external
sensors.
Figure 3. External Sensor Connection (805 shown)
14
Note
High frequency measurement (Crest Factor+) and
Temperature measurement automatically turn off
when an external sensor is connected to the
Meter.
To connect:
1. Open the connector cover and push the external
sensor into position.
2. Push  to open the Enter Sensitivity menu.
You must set the sensitivity in mV/g units.
3. Use the navigation keys to select a character in
the menu.
4. Push  to input the character into the field.
5. Repeat steps 2 and 3 for additional characters.
6. Push  to store the value in the Meter and exit
the menu.
7. Push  to start data collection.
The Meter automatically detects when you disconnect the
external sensor and is set to measure with the internal
sensor.
gqi05.eps
Note
Note