Device Options; Adjustable Focus (3 Focus Options Available); Laser Sighting (Sighting Option L); Figure 37: Laser Spot Size Indication - Fluke endurance series User Manual

Error! Use the Home tab to apply Überschrift 1 to the text that you want to appear here.

8. Device Options

Options are items, which are factory installed and must be specified at time of order.

8.1. Adjustable Focus (3 focus options available)

In dependence of the scheduled operation and environment, the end has to select the right
focus distance prior to place the order.

Focus Option F0: 190 - 300mm (7.4 – 12")

Focus Option F1: 300 - 600mm (12 – 24")

Focus Option F2: 600mm - infinity (24" – ∞)
8.2. Laser Sighting
(Sighting Option L)
The laser sighting allows fast and precise aiming at small, rapidly moving targets, or targets
passing at irregular intervals. The laser is specially aligned with the sensor's lens to provide
accurate, non-parallax pinpointing of targets. The laser comes as a small, bright red spot
indicating the center of the area being measured.
The laser is a Class II, AlGaInP type laser with an output power less than 1 mW, and an output
wavelength of 650 nm. The laser complies with FDA Radiation Performance Standards,
21CFR, subchapter J, and meets IEC 825, Class 2 specifications
To preserve laser longevity, the laser automatically turns off after
approximately 10 minutes of constant use!
Avoid exposure to LASER light! Eye damage can result.
Use extreme caution when operating!
Never look direct into the LASER beam.
Never point directly at another person!
If LASER Sighting is activated, avoid looking through the Visual Sighting Port
of the Control Panel. Mirror and dispersion effects can injure Eyes.
Innovative High Temperature Infrared Pyrometers
Laser dot
Measured spot at the inner of the circle
Spot marker

Figure 37: LASER Spot Size Indication

Warning
43