Options; Adjustable Focus; Laser Sighting (Sighting Option L); Figure 35: Laser Spot Size Indication - Fluke Endurance Series User Manual

Endurance® Series
Users Manual

8. Options

Options are items, which are factory installed and must be specified at time of order.

8.1. Adjustable Focus

In dependence of the scheduled operation and environment, the end has to select the right
focus distance prior to place the order.
•
•
•
8.2. Laser Sighting
The laser sighting allows fast and precise aiming at small, rapidly moving targets, or targets
passing at irregular intervals. The laser is specially aligned with the sensor's lens to provide
accurate, non-parallax pinpointing of targets. The laser comes as a small, bright red spot
indicating the center of the area being measured.
The laser is a Class II, AlGaInP type laser with an output power less than 1 mW, and an output
wavelength of 650 nm. The laser complies with FDA Radiation Performance Standards,
21CFR, subchapter J, and meets IEC 825, Class 2 specifications
1.800.561.8187
46
Focus Option F0: 190 - 300 mm (7.4 – 12")
Focus Option F1: 300 - 600mm (12 – 24")
Focus Option F2: 600mm - infinity (24" – ∞)
(Sighting Option L)
Laser dot
Measured spot at the inner of the circle
Spot marker

Figure 35: LASER Spot Size Indication

To preserve laser longevity, the laser automatically turns off after
approximately 10 minutes of constant use!
Avoid exposure to LASER light! Eye damage can result.
Use extreme caution when operating!
Never look direct into the LASER beam.
Never point directly at another person!
If LASER Sighting is activated, avoid looking through the Visual Sighting Port
of the Control Panel. Mirror and dispersion effects can injure Eyes.
www.
Warning
information@itm.com
.com