Table of Contents
Advertisement
802EN
Users Manual
Accessory Connectors
The Product has two accessory connectors:
•
External Sensor
•
Audio
External Sensor
In addition to the built-in piezoelectric accelerometer, an
optional external sensor connects to the Product. The
connector type for the external sensor is a Subminiature
version B (SMB).
Figure 3
sensor to the Product.
The Product supports but does not provide an
external accelerometer. Go to
www.fluke.com.cn/
accelerometer.
10
shows how to connect an external
Note
http://
to purchase an external
Figure 3. External Accelerometer
Note
When the external sensor is connected to the
Product, the screen shows ACCY after you push
and hold for 2 seconds. This means the
external sensor is working and the built-in sensor
is automatically turned off.
Advertisement
Table of Contents
