Accessory Connectors; External Sensor - Fluke 802CN User Manual

Figure 2. Flashlight

Accessory Connectors

The Product has two accessory connectors:
•

External Sensor

• Audio
External Sensor
In addition to the built-in piezoelectric accelerometer, an
optional external sensor connects to the Product. The
connector type for the external sensor is a Subminiature
version B (SMB). Figure 3
sensor to the Product.
shows how to connect an external
Note
The Product supports but does not provide an
external accelerometer. Go to
www.fluke.com.cn/ to purchase an external
accelerometer.
Figure 3. External Accelerometer
Note
When the external sensor is connected to the
Product, the screen shows ACCY after you push
and hold  for 2 seconds. This means the
external sensor is working and the built-in sensor
is automatically turned off.
Vibration Meter
How to Operate
http://
9