Example Programs; Using Flash Programmer Utility; Adsp-21160 Ez-Kit Lite - Analog Devices ADSP-21160 EZ-KIT Lite System Manual

The location of the signals can be found in
Interrupt pins are summarized in
configuring the
ware Reference.
Table 2-3. Interrupt Pin Summary
1
Interrupt
IRQ0
IRQ1
IRQ2
1 are available on connector
IRQ0–2

Example Programs

Example programs are provided with the ADSP-21160 EZ-KIT Lite to
demonstrate various capabilities of the evaluation board. These programs
are installed with the EZ-KIT Lite software and can be found in
\...\VisualDSP 3.5 32-Bit\211xx\EZ-KITs\ADSP-21160\Examples
refer to the readme file provided with each example for more information.

Using Flash Programmer Utility

The ADSP-21160 EZ-KIT Lite evaluation system includes a Flash Pro-
grammer utility. The utility allows you to program the Flash memory on
the EZ-KIT Lite. The Flash Programmer is installed with VisualDSP++.
Once the utility is installed, it is accessible from the Tools pull-down
menu.
For more information on the Flash Programmer utility, select Start and
choose Programs–>Analog Devices–>VisualDSP++ 3.5 for 32-bit Pro-
cessors–>VisualDSP++ Documentation.
ADSP-21160 EZ-KIT Lite Evaluation System Manual
pins, see the ADSP-21160 SHARC Processor Hard-
~IRQ
Connects To
SW3
SW4
SW5
.
P2
Appendix B,
Table 2-3. For more information on
Description
connect to the push buttons and supply
IRQ0–2
feedback for program execution. For instance, you
can write your code to trigger a FLAG when a
routine is complete.
Using EZ-KIT Lite
"Schematics".
. Please
2-5