Windows 2000 Usb Driver - Analog Devices ADSP-21160 EZ-KIT Lite System Manual

11. Click OK.
The driver installation is now complete, as shown in
Figure 1-9. Windows 98 – Completing Software Installation
12. Click Finish to exit the wizard.
13.Verify the installation by following the instructions in
Driver Installation" on page

Windows 2000 USB Driver

VisualDSP++ 3.5 installation software pre-installs the necessary drivers for
the selected EZ-KIT Lite. The install also upgrades an older driver if such
is detected in the system.
Prior to running the VisualDSP++ 3.5 installer, ensure there are no
other Hardware Wizard windows running in the background. If
there are any wizard windows running, close them before starting
the installer.
ADSP-21160 EZ-KIT Lite Evaluation System Manual
1-14.
Getting Started
Figure 1-9.
"Verifying
1-11