Printing Instruction; Preparation Before Printing - Geeetech DP200 User Manual

copying it to the USB driver, insert USB into printer to upgrade operation system in
this interface, as shown in Picture (5-20).If the machine is already the latest system,
as shown in Picture (5-21).
browser cache before using the computer web.)

6 Printing instruction

6.1 Preparation before printing

1) Unpack the machine and then tear off the protection film outside.
2) Take off the cover, put out the EPE packing and the printing platform inside the
printer to check whether it is clean.
be tested before leaving the factory, and there may be slight scratches on the
bottom of the printing platform during transportation, but it will not affect
normal use of the machine and model printing effect.)
3) As shown in Picture (6-1), Loosen the black fixing knob on the left and right sides
of the 2K forming screen and take out the resin case.
As shown in Picture (6-2).Check whether the upper surface of the forming screen
is clean and free of foreign matter, and check whether the release film on the
bottom of the resin case is damaged. (The printing platform and resin case are
placed outside the machine at this time.)
(Picture6-1)
Shenzhen Getech Technology Co.,Ltd
(Note: After each upgrade, you need to clear the
(Note: To ensure quality, each machine will
14
(Picture6-2)