SHENZHEN GETECH TECHNOLOGY CO,.LTD
Preparation
Step1. Open the box, taking out the foam box containing your A10M.
Step 2. Remove A10M 3D printer from foam box and set it down on a stable surface.
Note:
You will see a printing residue on the printing platform, which indicates your A10M has already gone
through the 24 hours aging test, you can feel free to use.
Step 3. Checking accessories
Please check the accessories based on the items in the assembly paper.
1. Check Power Supply
The power supply unit and control board of A10M are installed in the bottom of the printer, saving space, as
2