Control Parameters - Lauda RP 845 Operating Instructions Manual

Weekplan
Monday
Tuesday
Wednesday 08:00 -------
Thursday
Friday
Saturday
Sunday
Help Menu
Status
Function
Action
Set time
Set date
Help Menu

7.13 Control parameters

The control parameters are optimized ex-works for operation as a bath thermostat (with water as the
bath medium) with internal control. The parameters are also preset for the operation of external
containers with external control. Sometimes however, the operation of external containers requires
adaptation. In addition, the thermal capacity and viscosity of the heat carrier liquid sometimes require
adaptation.
86
Time Action Time Action
07:30 Start 17:00 -------
10:00 Prog.4 17:00 -------
17:00 -------
08:00 ------- 17:00 -------
08:00 ------- 16:00 Standby
08:00 ------- 17:00 -------
08:00 ------- 17:00 -------
End T
set
Start
Standby
Program 1
Program 2
Program 3
Program 4
Program 5
End T
set
− The intelligent menu guidance with the Master and Command detects whether you
have set the device (as described in Section 7.7.4), to internal or external control and
only displays the relevant dialog boxes in each case.
− Your Proline Thermostat automatically optimizes some control parameters. This
automatic mechanism should only be deactivated and manually optimized in
exceptional cases.
Proline Low-temperature Thermostats
−
Weekplan
window shown on the left.
− Using the cursor keys
field, which is to be filled in.
− Open the input dialog of the field with
an action in the action field.
− In the example on the right, the
thermostat is started on Monday at 7:30h,
Program 4 is executed at 10:00h on
Tuesday and the standby mode is
T
fix
switched in on Friday at 16:00h. Fields
displaying ------ are passive.
Confirm each field selection with
with
The menu
to be carried out:
−
Start
standby mode.
−
Standby
(refrigerating unit, heater and pump are
switched off).
−
Program X
defined in the programmer are
processed.
T
fix
Starting up
Arrange takes you to the
,
: Select a time in the time fields and
without making changes.
Action is used to define what is
activates the thermostat from the
activates the standby mode
all actions of this program
YACE0072 / 21.08.07
select the
or quit