Lauda RP 845 Operating Instructions Manual page 89

Proline Low-temperature Thermostats
D
Dr/l
Command
Control Parameters
Control para. sets
Tv manual/auto
Correction limitation
Help Menu
YACE0072 / 21.08.07
Parameter Slave controller (P-controller):
− Sl proportional range:
− Tve, Tde, Prop_E changeover to Auto/ Man
°C
@
automatic or D
Works setting is automatic. These three parameters should only be
modified by experienced control technicians!
Hold
− Correction limitation Dr/l See introduction.
°C
Kpe
Tne
Tve (auto) 83
Tde (auto)
Xpf
Prop_E(a)
End T
LM = manual.
pressed for 3 seconds, then make changes.
Parameters
− Open the device parameter menu via the
0,50
100
− With the cursor keys continue to
8,3
4,0
30
− The adjacent window appears.
− Where applicable change parameters
T
set fix
− Select the parameters to be changed with
− Then change the value in the following
−
Starting up
hO = Xpf
Control Control Parameters Control
soft key Menu
Control Control Parameters
Control Parameters
Parameter endings:
e = Master controller, f = Slave controller.
marked with (auto) to manual input with
Tv manual/auto .
and confirm with
settings window and confirm with
Correction limitation
in kelvin.
D @ =
.
.
.
.
see introduction.
89