9
Maintenance
9.1
Cleaning
Cleaning can be carried out with water to which a few drops of surfactant (washing-up liquid) have been
added and using a damp cloth.
9.2
Device status
The thermostat can be conveniently checked with the Command Console. Some values can however
also be interrogated in the Master version.
9.2.1 Interrogating the device type
LMDkt
Settings
With low temperature thermostats, the device type is detected automatically and cannot be changed.
9.2.2 Software version
LMDkt
Here, only the version of the control system in the Master is displayed.
Settings
With the Command Console the versions of the control system (
Command Console (
modules are displayed.
9.2.3 Serial numbers
LMDkt
Rlp G
Under
Rlp K
Under
Settings
With the Command Console the serial number of the Master (
(
Command
), cooling system (
114
Withdraw the equipment mains plug before cleaning.
No water must enter the control section.
Carry out appropriate decontamination if hazardous material is spilt on or in the
equipment.
The cleaning or decontamination method is determined by the user's specialist
knowledge. In case of doubt, contact the manufacturer.
O@pA-
rXOF
-
Device status
Device type
RgmVW
TDp
Device status
Software version
Command
), cooling system (
RgmVW
Rlp G
the first five places of the ten-character serial number of the Master device are displayed.
the last five places are shown.
Device status
Serial numbers
Cool
) and other connected modules are displayed.
Proline Low-temperature Thermostats
Section 7.6.4
Section 7.6.8.
.
Cool
) and, where applicable, other connected
Rlp K
and
Section 7.6.8.
.
Maintenance
Control
), safety system (
Master
), Command Console
Safety
),
YACE0072 / 21.08.07