Controlspaces; File Management; Coordinate System; Rename Objects To Reflect Use And/Or Location - Leica ScanStation P30 Basic Training Manual

Coordinate System

A red, green, and blue icon represents the current coordinate system's
origin (0,0,0). For ScanWorld 1 and ScanWorld 2, the origin is at the local
scanner position.
Summary
ModelSpaces are where we will view, query, and model the point clouds. We access a view to
ModelSpace View.
ModelSpaces via a
To view all of the contents of a
As long as the original scan data inside the Scans folder is present, a new
working environment containing a fresh copy of the raw data can be created via
selecting the ModelSpaces folder and executing Create

6.4 ControlSpaces

A ControlSpace is similar to a
to its parent ScanWorld that are designated as "constraint" objects or possible constraint
objects in the registration of that ScanWorld. Every ScanWorld by default has a ControlSpace.
• Double Double- - - - click Double Double
• Inspect the ControlSpaces for ScanWorld 1 and ScanWorld 2.
• Note the tie-points with registration labels in each.
The ControlSpace will contain all objects used in a registration. Every ScanWorld has at least one
ControlSpace.

7 File Management

Rename Objects to reflect use and/or location

You are strongly encouraged to always give specific or highly descriptive names to each of the
ModelSpaces, ModelSpace Views, and Registration Files.
Any of the folders or objects can be renamed at any time.
•
The only file name that you cannot change in the
•
Introduction to Cyclone
ModelSpace View
ModelSpace View . It is used as a container for all objects attached
click a ControlSpace in the click click
Module 2.0 – Navigator & Navigator's Objects 21 - 22
, click Viewpoint | View All Viewpoint | View All. Viewpoint | View All Viewpoint | View All
Create | | | | ModelSpaces ModelSpaces. . . .
Create Create ModelSpaces ModelSpaces
Navigator
to open it.
Navigator
is the name of the Database.