3) In the
Unify Clouds
dialog, click Unify.
Unify Clouds: Referenced
4) Click Yes in the
Point Clouds
dialog to begin the unification
process.
1.3 Copy the Modelspace
Throughout the course of this module, work in a designated ModelSpace. Perform a simple copy
and paste of the existing unified ModelSpace, and then rename it to something specific and
recognizable.
ModelSpace 1
1) Select the unified
Completed Registration project folder.
2) Click Edit | Copy.
ModelSpaces
3) Highlight the
up.
4) Click Edit | Paste.
5) Rename the pasted ModelSpace to
Alignments and Sections
6) Rename the existing ModelSpace View (one
Alignments and Sections View.
level down) to
4 - 18
Module 5.3 – Alignments&Sections
under the
folder one level
.
Figure 3
Figure 4
Figure 5
Data Extraction