6.2 Set the Cutplane Slice from Pick Points
The command "Tools | Cutplane | Set Slice from Picks" set a Cutplane perpendicular to the
selected axis, and its slice planes are positioned to pass through the two pick points.
Create a slice along the z-axis – resulting in a horizontal slice through the point cloud.
Figure 44
6.3 Set Slice Thickness
Once a slice has been defined, its thickness can be adjusted.
30 - 34
Module 4.0 – Point cloud Modifying
Working in a side View, pick the 1
•
through which one extent of the Cutplane will
pass.
Shift+Pick the second point through which the
Shift+Pick the second point
•
Shift+Pick the second point
Shift+Pick the second point
other extent of the Cutplane slice will pass.
•
Select Tools | Cutplane | Set Slice from Picks
Tools | Cutplane | Set Slice from Picks and
Tools | Cutplane | Set Slice from Picks
Tools | Cutplane | Set Slice from Picks
select the Z Axis
Z Axis. . . .
Z Axis
Z Axis
The active Cutplane and the View
Slice option are automatically
enabled.
Figure 45
Organization/Visualization point clouds
st st st st
pick the 1
point
point
pick the 1
pick the 1
point
point