How To Remove Selected Points; Add Constraints - Leica ScanStation P30 Basic Training Manual

1.5 How to remove selected points

• Single-Pick:
Texture Editor (Image):
o
ModelSpace View
o
again, the other pick will disappear.
Multi pick mode:
•
Texture Editor (Image):
o
ModelSpace View
o
be removed again and the pick will disappear.

1.6 Add constraints

If you have selected one pick on the picture and one in the point cloud continue:
Click the Add Add button in the
• Add Add
Figure 16
Repeat the last steps for six more features.Pick features that are easy to identify such as
corners.
It is possible to multi-pick the features in the
•
View
, if the picks are made in the same order.
10 - 32 Module 4.1 – Texture Mapping
Select the points again, the other pick will disappear.
: When Pick Mode is active
Right-click on the image and click Remove Last Pick"
: When Multi-Pick Mode is active
constraint dialog (Texture Editor)
Texture Editor (Image)
select the points
select the point to
Figure 17
the Modelpsace
and
Organization/Visualization Pointcloud