Edit A Limit Box - Leica ScanStation P30 Basic Training Manual

4.2 Edit a Limit Box

The created Limit Box is aligned to the Viewpoint it has been created in. It can now be edited to
finally encompass only the points of the silo.
Change to the pick mode with hotkey '
•
• Pick Pick the yellow frame of the Limit Box. Pick Pick
• Pick the orange handles appearing on each side of the Limit Box and change its size by Pick Pick Pick
dragging this side further in or out until only the actual silo is contained.
Selecting and moving the blue handles in the corners will move the limit box
itself.
16 - 34 Module 4.0 – Point cloud Modifying
Figure 22
hotkey ' or
hotkey ' hotkey '
Figure 23
Organization/Visualization point clouds