Set The User Coordinate System To An Object - Leica ScanStation P30 Basic Training Manual

5.4 Set the User Coordinate System to an Object

As a next option we will use already created objects as a basis and align the coordinate system
of the ModelSpace to a selected patch.
First we will create a patch on the façade opposite to the façade we worked on before.
Navigate to the façade shown in the picture below Navigate
• Navigate Navigate
Figure 35
Figure 36
Figure 37
Organization/Visualization point clouds
Figure 34
Use the polygonal fence mode and draw a small
•
fence fence
fence fence
• Selection | Point Cloud Sub- - - - Selection | Add Inside Selection | Point Cloud Sub Selection | Point Cloud Sub Selection | Point Cloud Sub
Fence Fence
Fence Fence
• Pick one point in the Subselection Pick Pick Pick
• Create Object | Region Grow | Patch Create Object | Region Grow | Patch. . . . Create Object | Region Grow | Patch Create Object | Region Grow | Patch
Region Grow Patch window.
Click OK OK in the OK OK
•
Module 4.0 – Point cloud Modifying
draw a small
draw a small draw a small
Selection | Add Inside Selection | Add Inside Selection | Add Inside
25 - 34