Settings on the ScanStation P30
Select Status | Connections.
•
Switch WiFi Operation to Always On.
•
In WiFi Connection choose Access point mode.
•
Settings on the Viva Controller
Start the P30 Remote Control application on your Leica Viva Controller by
•
double-clicking the P30 Remote Control desktop icon.
Within the ScanStation P30 Remote Control dialog press Find scanner and
•
wait for your Leica ScanStation P30 to be listed within the list of available
scanners.
As soon as your Leica ScanStation P30 is listed, select it and press Connect.
•
Close the Leica P30 WiFi... window as well as the ScanStation P30 Remote
•
Control dialog by pressing of the appropriate dialog.
General Remark
The USB port of the Leica Viva Controller will not replace the USB port of the Leica ScanStation
P30 while you are connected to the scanner. In order to download scanning projects, upload
control point files, or system files you always have to use the USB port of the Leica ScanStation
P30.
Scanner & Scanning Features
Figure 50
Module 1.0 - Scanning with ScanStation P30
47 - 60