Extrusion - Leica ScanStation P30 Basic Training Manual

Extrusion

Extrusions are created with a specified thickness along a userspecified axis or along the patch's
normal. Now, we will give the patch some thickness by extruding it along its normal to a picked
point.
1) Turn on the pickability of point clouds in the Set Selectable dialog (Selection | Set
Selectable). Selectable
Selectable Selectable
2) Pick the patch, then multi-pick another point to extrude the patch to. (SeeFigure 20)
3) Click Edit Object | Extrude | Extrude To Last P Edit Object | Extrude | Extrude To Last Pick Edit Object | Extrude | Extrude To Last P Edit Object | Extrude | Extrude To Last P
Data Extraction
Figure 20
ick. ick ick
Figure 21
Module 5.0 -
Cyclone Basic Modelling
Selection | Set
Selection | Set Selection | Set
15 - 32