1 Getting Started
1.1 Load the Database
Locate the database named
1) Launch Cyclone.
2) In the Navigator, click Configure |
Databases.
Configure Databases
3) In the
Add Database
4) In the
button to be able to browse to the database
file. (Figure 1)
5) Click Open.
6) Click OK.
7) Click Close.
The database is loaded into the Cyclone Navigator under the server.
1.2 Unify point Clouds
The Unify Clouds command is typically used in a ModelSpace containing a registered set of
scans and a large number of point clouds. Performance is improved by the cloud unification
process, in that a single point cloud is created.
1) In the Navigator, select
Completed Registration
exists under the
project folder.
2) Click Tools | Unify ModelSpace...
Data Extraction
ImolaBridge.imp
and configure it to the Cyclone Navigator:
dialog, click Add...
dialog, click the browse
ModelSpace 1
that
Figure 1
Figure 2
Module 5.3 – Alignments&Sections
3 - 18