Review - Leica ScanStation P30 Basic Training Manual

7) Select all sections listed in the
Section.
Collect Points in Section is used to segment the points that fall within the
•
extents of the selected section's limit box.

6 Review

• By means of an alignment object we were able to create sections along it at
specified stations.
• Further, we were able to use the Sections Manager to view, measure,
generate cross-section lines and collect points.
18 - 18 Module 5.3 – Alignments&Sections
Sections Manager
, then click Section | Collect Points in
Figure 27
Data Extraction