Handlebar Position; Adjusting The Handlebar Position - Husqvarna 701 Supermoto 2017 Owner's Manual

11 TUNING THE CHASSIS
11.13

Handlebar position

11.14

Adjusting the handlebar position

Warning
Danger of accidents A repaired handlebar poses a safety risk.
If the handlebar is bent or straightened, the material becomes fatigued. The handlebar may break as a result.
–
Change the handlebar if the handlebar is damaged or bent.
–
Fit the rear fairing.
–
Install the air filter box.
–
Mount the side cover. (
–
Mount the seat. (
–
Remove the motorcycle from the work stand.
–
Check the static sag of the shock absorber. (
–
Adjust the rebound damping of the shock absorber. (
The holes on the handlebar support are placed at a distance of
Hole distance
The handlebar can be mounted in 2 different positions. In this way, the handlebar can be
mounted in the most comfortable position for the rider.
F00593-10
p. 86)
p. 85)
 3.5 mm (0.138 in)
p. 71)
p. 69)

from the center.
76