12
SERVICE WORK ON THE CHASSIS
12.12
Take off the side cover
12.13
Mounting the side cover
Preparatory work
–
Remove the seat. (
Main work
–
Remove screws
–
Take off the side cover.
–
Repeat these steps on the opposite side.
F00600-10
Main work
–
Position the side cover, and mount and tighten screws
Guideline
Screw, trim
–
Mount and tighten screws
Guideline
Screw, trim
–
Repeat these steps on the opposite side.
F00601-10
Finishing work
–
Mount the seat. (
p. 85)
and
.
.
p. 85)
.
M5x12
3.5 Nm (2.58 lbf ft)
M5x17
3.5 Nm (2.58 lbf ft)
86